TRUE BLUE Cleaner Concentrate - Suppressor

Cleaner Concentrate for Suppressors. Breaks down and removes carbon build with in suppressors. Safe on all metals and coatings. Ammonia free.

Will break down carbon but depends on the layer of build up. The length of time needed to soak depends on the carbon build up within the suppressor. Start at 4-5 hours and increase if more time is needed. Cleaning on a regularly schedule may shorten the soak period time. Using our proven Suppressor Syrup reduces the carbon bonding which decreasing cleaning time even more.

Serviceable Suppressor: Two options:

1. For non-flow through design, use our Suppressor Plugs that fits each end of the suppressor. Plug one end, fill with Concentrate leaving room to insert the second plug. Let sit for 4-5 hours, longer if needed. Suppressors that can be disassembled, remove a plug and pour the cleaner into container large enough to scrub the internal parts of the suppressor with a copper or stainless brush. Once satisfied, rinse with water, dry then assemble using our Suppressor Syrup as per instructions.

Sealed Suppressor: Same as above then drain the fluid, rinse, let dry, apply Suppressor Syrup as per instructions.

2. Ultrasonic and Submersion Use: Our Concentrate is ideal for submersion or ultrasonic machines for all suppressor especially Flow Through style. Get this, most suppressors will fit in a plastic wide mouth tall beverage bottle. See photo. 🙂

Dilution Ratio: Filled Suppressor or Submerged: un-diluted. Ultrasonic 5:1 – 10:1 For best efficiency and performance, use distilled water. Hard water can affect all cleaners performance.

suppressor cleaner, ultra sonic, gun cleaner, firearms cleaner, weapons cleaner, suppressor

Cleaner Concentrate for Ultra Sonic & Submersion

TRUE BLUE Cleaner Concentrate is an efficient water soluble high-performance cleaner/degrease for all types of firearm components and suppressors. Removes and flushes away oil and grease. Breaks down and removes carbon. Safe on metals, plastics, neoprene and coatings used for firearms, suppressors and knives. Ammonia free.

Ultrasonic and Submersion Use: Place components in the machine or container. A wide mouth water bottle works great for most suppressor and small parts. Let sit until parts are clean, scrub as needed with stiff brush, copper or stainless brush. Rinse throughly. Dry the apply our Gun Oil, Gun Grease or Suppressor Syrup

Dilution Ratio: Ultrasonic and submersion 10-15:1. Suppressor 5:1 Spray 10:1. For best efficiency and performance, use distilled water. Hard water can affect all cleaners performance and can leave water spots. It is recommended you spot test in an inconspicuous location before using. Apply diluted clean onto the surface you are cleaning. Leave it for 2-5 minutes, rinse, inspect.

IMPORTANT NOTICE TO PURCHASER This information is based on knowledge believed to be reliable and appropriate research and testing. It is offered in good faith, without guarantee as the use of this product is beyond control of the seller and/or manufacturer. The seller and manufacturer makes no warranty about the outcome of the product’s use. Read all directions and information before using as described above.

Suppressor Cleaner, ultra sonic cleaner, gun cleaner, cleaner

TESTIMONIALS