Last week, we were on the road for a few classes in Washington. On our travels, I stopped by our friends with Rainier Arms in Auburn, Washington. It was nice to catch up with their team. While at their shop, I noticed a cool new product that looked like it could help speed up the maintenance process for the firearms that we use in our Kids Firearm Safety 2 and Teen Rifle classes. True Blue Gun Lubricants has started making a cool syringe-type applicator for their line of gun greases. True Blue has been our sponsor for many years now, and we like their products because there are no harsh chemicals in their complete line of gun maintenance products. Needless to say, we are fans of their products. All are nontoxic, odorless, and biodegradable; these are all important features that we look for because we never want to expose them to harmful chemicals. This must have been a newer product release for True Blue Gun Lubricants I felt confident that this would be a good purchase.

My initial thoughts are that it is reusable and works with their current line of gun greases. It will give you the ability to refill the syringe once it gets emptied. I found this very helpful for the work that we do. With close to 60 firearms in our inventory, we are always looking for products that will help us speed up the process or give us the ability to scale our maintenance program. Inside the package comes the syringe, a brush for cleaning, an O-ring set, and a needle applicator. This is one of our favorite features of their gun lubes. It allows us to apply lube exactly where we need it with very little excess. We look forward to trying out this new version of their gun lube. This setup promises to make our job of maintaining all of our firearms to keep them running smoothly and safely. You can find out more information about this product or many of their other products on the True Blue Gun Grease web site.

Thank you for reading!! ZERO firearm accidents is the only acceptable goal!!®

 

Kids S.A.F.E Foundation

I use True Blue Gun Grease on ejectors and ejector springs/plungers and to treat all the blued surfaces (barrel) of my firearm.

Ejectors and Ejector Springs/Plungers:

It has been my experience that conventional gun grease tends to be thicker and attracts dust and grime in dirtier environments such as sporting clays courses where there are dusty cart paths or in the field where firearms get exposed to large amounts of dirt and debris.  True Blue Gun Grease is thinner and only a light surface film is required for it to perform.  I use significantly less grease, it attracts less dirt and debris, and my firearm stays cleaner, longer.

Barrel Surfaces:
Sometimes I have to shoot and compete in inclement weather and by far, rain is the hardest on my equipment.  Moisture finds its way into soldered joints of the mid and top rib and is prone to rusting.  If barrels aren’t dried and lubricated properly after being rained on they are at risk of surface rust.  When I used conventional, mainstream gun oil to protect my firearm, I would sometimes experience an orange discoloration on an oiled, white cloth when I wiped down my firearm so I knew that there was very light surface rust.  Once I started using a light coating of True Blue Gun Grease buffed to a shine on my blued surfaces, I no longer experienced any sort of orange surface rust.  This told me that the lubricant was working at a molecular level versus a surface level.

Kinsey Duzan – Sponsored Shooter
IG: kinseyduzan

We received brand new over/under shotguns to use this year and I was really concerned about them being too tight for the young campers to open/close.

My regiment is normally white lithium grease on the hinges to help with break-in and normal use. I switched to your Gun Grease on the hinges and I have to say that the new over/unders just fall open and close easy for the campers. I am seriously impressed.

I have used just about every cleaning and lubrication product on my personal firearms and I have to say that I certainly would endorse your products for our camp in the shotgun area!

I will be purchasing your products very soon for my personal use because I am that impressed. I will check Instagram to see if you’re on there with your company to make some endorsements.

Scott Schnelle – Lead Shotgun Instructor at NRA Whittington Center Adventure Camp

Using TRUE BLUE Gun Grease on a G17 Gen 3 RTF2 LAV model. Man I must say after running a very intense, wet, muddy ground defense course this past weekend. The Glock ran top. Always racking slickly. Even late in the day with mud all over the gun. It racked excellent never jamming. After the training day I was surprised how little debris or carbon was around. This stuff is excellent and will continue to run and test.

Instinctive Firearms Review

Hi Andy,
I thought I should give you an update. I’ve been using the True Blue (Gun Oil) and Gun Grease exclusively on my Browning Citori XS Skeet gun for the last year. I’ve run around 15,000 rounds through this gun in practice and competition using mostly the Gun Grease. What I like is that the grease is easy to apply AND remove without causing a mess. When operating the gun, the grease stays where I put it and does not migrate back into the receiver where it could carry unwanted dirt and crud. When I’m done for the day, a quick wipe with a rag removes the lube before storage in the take down case. I apply new lube each time I assemble the gun to shoot it. The gun has shown no wear since using this grease, and the internal parts I lubed with True Blue (Gun Oil) continue to function flawlessly.
So far, it’s good stuff. Thanks for the samples (SS 2017).

Stephan Waltz – S J Waltz Gunsmithing LLC

TRUE BLUE (Gun Grease) worked awesome this week during the California State Championship. The heater grease stayed strong and lasted through 1000 rounds and is still going strong. Works great on Over & Under Shotguns like Kaden’s Sliver Pigeon. We love testing new products and TRUE BLUE Gun Lube is exceeding our expectations. Instagram post

 

Jamie Fitch

I received a sample of Gun Grease and True Blue Gun Oil at SHOT (SHOW 2017) this past January. I just wanted to follow up with how I feel it performs. I used the Gun Grease in my M1 Garand and M1 Carbine and it worked very well. The big test was in my rim fire race guns. I am part of the Tactical Solutions Shooting Team, and up to this point in the summer, I have gone through approximately 15,000 rounds of ammunition in my Tactical Solutions X-Ring rifle and my Ruger Mkiii 22/45 in practice and competitions. I have been using the Gun Grease in the X-Ring and it has run flawlessly. This is by far one of the cleanest lubricants I have ever used. I clean my weapons every 3 or 4 thousand rounds and the carbon and grime wipes right off. I have been using the Gun Oil in my 22/45 and like-wise have had no issue with operation. You have definitely hit a home-run with this combination. I make it a point to brag up your product to all my fellow shooters.
Thanks,

Jeffery Packer, MSG (Ret) Executive Director/Chief Curator Idaho Military Museum

Started last week (11/1/17) using the (Gun) grease on the cranes of my shot revolvers and using the lube (Gun Oil) on my AR rifles…loving it. We get huge carbon build up on the cranes of our 686 pistols. It gets baked on, after trying the (Gun) grease it just wiped off easily. Also trying the lube on my STI race gun and my shadow in cold weather. Minus 6 celsius (21º F) tonight…gun was smooth as silk.

Kelly Abrams DVC Gun Range – Vancouver BC

For my part, I have run the crap out of the oil in M-4 and Glock, and the grease in 1911 and .308) with no issues. I am still really impressed with the stuff.

N.C, US Army IDPA and PRS Shooter